Reese 44707 PROFESSIONAL RECEIVER User Manual

Browse online or download User Manual for For the car Reese 44707 PROFESSIONAL RECEIVER. Reese 44707 PROFESSIONAL RECEIVER User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Instructions
Mitsubishi Outlander
(Except Sport)
Part Numbers:
44707
75888
87656
Hitch Shown In Proper Position
Equipment Required:
Wrenches: 14mm,17mm, ¾”
Drill Bits: None
1. Lower exhaust by disconnecting (3) rubber exhaust hangers from muffler.
2. Remove tow hook from driver side vehicle frame. Return tow hook & fasteners to owner.
3. Raise hitch into position, install all fasteners as shown.
4. Raise exhaust back into position by re-connecting rubber exhaust hangers (re-attach muffler to exhaust pipe if removed in step 1).
Tighten all M10 x 1.25 CL8.8 fasteners with torque wrench to 42 Lb.-Ft. (57 N*M)
Tighten all ½-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
© 2014 Cequent Performance Products Printed in México
Sheet 1 of 3 75888N 1/20/2014 Rev. X1
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent
entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a
vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.
Fastener Kit: 75888F
Do Not Exceed Lower of Towing Vehicle
Manufacturer’s Rating or
Hitch type
Max Gross
Trailer WT (LB)
Max Tongue
WT (LB)
Weight Distributing
4000 (1816 Kg.) 600 (272 Kg.)
Weight Carrying
Ball Mount
4000 (1816 Kg.) 600 (272 Kg.)
Wiring Access Location: SUV3, SUV4
Form: F205 Rev A 5-6-05
Plastic Fascia
Existing Weldnut
j
m
Vehicle Frame
j
Qty. (2) Hex Bolt M10 x 1.25 X 40mm CL8.8
m
Qty. (4) Flanged Lock Nut 1/2-13
k
Qty. (2) Conical Toothed Washer 3/8”
n
Qty. (4) Hardened Flat Washer 1/2”
l
Qty. (4)
Carriage Bolt 1/2-13 X 4-1/2 GR5
Note: All Fasteners Typical Both Sides of Vehicle.
l
k
Removal of spare tire will make installation easier.
Accessory Rating
C
n
Page view 0
1 2 3

Summary of Contents

Page 1 - Mitsubishi Outlander

Installation Instructions Mitsubishi Outlander (Except Sport) Part Numbers: 44707 75888 87656 Hitch Shown In Proper Position Equipment Required: Wrenc

Page 2 - (exception Sport)

Instructions d’installation Mitsubishi Outlander (exception Sport) Numéros de pièce : 44707 75888 87656 Illustration de l'attelage en bonne posit

Page 3 - (excepto el Deporte)

Instrucciones de instalación Mitsubishi Outlander (excepto el Deporte) Números de partes: 44707 75888 87656 El enganche se muestra en la posición cor

Comments to this Manuals

No comments