Reese 118436 T-ONE CONNECTOR User Manual download pdf

5. Secure the black convertor box and trailer

wiring with double sided tape, cable ties

and/or locate a suitable mounting position

and drill a 3/32" hole and secure with screw

provided using mounting tab on convertor

to prevent damage or rattling.

WARNING

All connections must be complete for the

T-Connector to function properly. Test and

verify installation with a test light or trailer

once installed.

6. Reposition the trunk liner and reattach the

threshold panel.

NOTE

Store 4-Flat in trunk area when not in use.

WARNING

Overloading circuit can cause fires.

DO NOT exceed lower of towing

manufacturer rating or:

• Max. stop/turn light: 1 per side (2.1 amps)

• Max. tail lights: (4.2 amps)

Read vehicle's owners manual &

instruction sheet for additional information.

118436-037 Rev. A 04/16/07

ENGLISH

TOOLS REQUIRED:

Trim Panel Remover, Screwdriver,

Drill & Wrench

1. Open trunk and remove threshold panel.

Partially remove the felt trunk liner on

driver’s side, exposing the taillight wiring

2. Separate the harness connectors, being

careful not to break the locking tabs

3. Insert the T-connector between the harness

connectors and lock into place (Note: the

single plug-in for the right turn function

is on the driver’s side). Be sure that the

connectors are fully inserted with locking

tabs in place.

4. Use the existing ground stud or locate a

suitable grounding point. Drill a 3/32" hole

and secure the white wire using the eyelet

and screw provided.

CAUTION

Verify what is behind any surface prior to

drilling to avoid damage to the vehicle and/

or personal injury. Do not drill into any

exposed surfaces.

•

READ THIS FIRST:

Read and follow all vehicle warnings and installation

instructions before beginning installation. Wear safety

glasses and use all safety precautions during installation.

LISEZ CECI EN PREMIER:

Lire et observer toutes les consignes de sécurité et les

instructions avant de commencer l’installation. Durant

l’installation, veiller à toujours porter des lunettes de

protection et respecter les mesures de sécurité.

LEA ESTO PRIMERO:

Lea y siga todas las advertencias e instrucciones de

instalación del vehículo antes de empezar la instalación.

Use gafas de seguridad y todas las precauciones de

seguridad durante la instalación.

Installation Instructions

Directives de Montage

Instrucciones de Instalación

T-Connector

Connecteur en T

Conector en T

1 2

FRANÇAIS 2

Summary of Contents

Page 1

5. Secure the black convertor box and trailerwiring with double sided tape, cable tiesand/or locate a suitable mounting positionand drill a 3/32"

Page 2 - FRANÇAIS

ESPAÑOLHERRAMIENTAS NECESARIAS:Herramienta para retirar paneles de moldura, destornillador, broca y llave1. Abra la cajuela y retire el panel de umbra

Comments to this Manuals

No comments

Reese 118436 T-ONE CONNECTOR User Manual

Browse online or download User Manual for For the car Reese 118436 T-ONE CONNECTOR. Reese 118436 T-ONE CONNECTOR User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Reese 118436 T-ONE CONNECTOR