Reese 58492 REPLACEMENT PART - FIFTH WHEEL User Manual download pdf

REV. A

ASSEMBLY INSTRUCTIONS

R16/R20 HANDLE BUSHING

FIFTH WHEEL HITCH

For Installation Assistance or Technical Help, Call 1-888-521-0510

DEALER/INSTALLER:

(1) Provide this Manual to end user.

(2) Physically demonstrate procedures in this Manual to end user.

(3) Have end user demonstrate that he/she understands procedures.

END USER:

(1) Read and follow this Manual every time you use Hitch.

(2) Save this Manual for future reference.

(3) Pass on copies of Manual to any other user or owner of Hitch.

Item

Description

QTY

¼” Hex

bolts

Handle bushing

¼” Hex

nuts

¼” Coil

Removal and Reinstallation

1. With the hitch in the closed position, use hammer and center punch to remove roll pin (4)

from handle. Save the roll pin for reinstallation

2. Pull handle out through handle bushing (2).

3. Remove the 2 hex bolts (1) and nuts (3) from the handle bushing (2).

4. Slide new handle bushing (3) over handle.

5. Slide handle and handle bushing over square shaft and reinstall roll pin. Note : Handle

bushing is to be located on the inside of the vertical wall of the head assembly (fig 1).

6. Install the two hex bolts and nuts and tighten to 20 ft/lbs.

Fig.1

Reese 58492 REPLACEMENT PART - FIFTH WHEEL User Manual