Reese 44673 PROFESSIONAL RECEIVER User Manual download pdf

Installation Instructions

99-2007 Ford F250/350 Superduty Truck

Part Numbers:

75740

87618

44673

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 3/4”, 7/8”

Drill Bits: None

Fastener Kit: 75740F

Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating or

Wiring Access Location: PU1, PU2 --- PU3 on 04’ Heritage

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

10,000 (4540 Kg) 1000 (454 Kg)

Weight Carrying

Ball Mount

6000 (2724 Kg) 900 (408 Kg)

*See notes below regarding spare tire

Truck frame

97-2003 Ford F150 & F250 LightDuty Truck

2004 Ford F150 Heritage Truck

Bumper

z 2012 Cequent Performance Products, Inc.

Sheet 1 of 3 75740N 2-14-12 Rev. A

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent entry of

water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a vehicle and wear eye

protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.

Form: F205 Rev A 5-6-05

Tighten all 1/2-13 Gr5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Qty. (6) 1/2"-13 X 1-3/4” Carriage Bolt Gr5 Qty. (6) 1/2” Helical lock washer

Qty. (6) 1/4” x 1-1/2” x 2” Block with square hole Qty. (6) 1/2” Hex Nut

Qty. (6) ½” Flat Washer

1. Before installing hitch lower spare tire on all SuperDuty trucks. Lower spare tire on all Light Duty trucks with 16” or larger tires.

Spare will be relocated or reinstalled after hitch installation.

Note! - 20” spare tires will not allow original relocation under truck.

2. Make sure that no electrical wires or other obstructions are inside of truck frame so that bolts and blocks can sit flat on bottom of

frame when tightened in the following steps.

3. Install carriage bolts and blocks down through truck frame as shown in Figure 1. Raise hitch into position carefully so as not to

push bolts back through frame. Loosely install flat washers, lock washers and hex nuts onto carriage bolts. After ensuring that

blocks and bolts are sitting flat, torque bolts to 75 Lb.-Ft. (102 N*M).

4. Reinstall spare tire. Note: Spare tire may have to be relocated.

Figure 1.

All Fasteners Typical

Both Sides

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions99-2007 Ford F250/350 Superduty TruckPart Numbers:757408761844673Hitch Shown In Proper PositionEquipment Required:Wrenches: 3

Page 2 - Instructions d’installation

Instructions d’installationCamionnette Superduty Ford F250/350 1999-2007Numéro de pièce :Attelage montré dans la position appropriéeÉquipement requis

Page 3 - Instrucciones de instalación

Instrucciones de instalaciónCamioneta 99-2007 Ford F250/350 SuperdutyNúmeros de partes:El enganche se muestra en la posición correctaEquipo necesario:

Comments to this Manuals

No comments

Reese 44673 PROFESSIONAL RECEIVER User Manual

Browse online or download User Manual for For the car Reese 44673 PROFESSIONAL RECEIVER. Reese 44673 PROFESSIONAL RECEIVER User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Reese 44673 PROFESSIONAL RECEIVER