Reese 44569 PROFESSIONAL RECEIVER User Manual download pdf

Installation Instructions

GMC Acadia

Saturn Outlook

Buick Enclave

Chevrolet Traverse

Part Numbers:

75528

87435

44569

78218 UH

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18mm, 3/4”

Drill Bits: None

Frame rail

1. Remove the fascia door. Return to owner.

2. Detach the rubber exhaust hangers and lower the rearward portion of the exhaust ((2) on single exhaust, (4) on dual).

3. Raise hitch into position over the exhaust pipes aligning the slots in the hitch with the weldnuts in the bottom of the frame

rails.

4. Loosely install the M12 bolts and conical washers for existing weldnuts in bumper. Or install 1/2” bolts, conical washers and

handle nuts for bumpers without existing weldnuts.

5. Install M12 bolts & conical washers through receiver at the bumper attachment. Sandwiching the spacer between the

receiver and bumper and into the weldnuts in vehicles bumper.

6. Loosely attach fasteners as shown, center hitch on vehicle and tighten fasteners to specifications below.

7. Raise exhaust system back into position.

Tighten all M12 bolts with torque wrench to 92 Lb.-Ft. (125 N*M), Tighten all 1/2”-13 Gr.5 bolts with torque wrench to 50 Lb.-Ft. (68N*M)

Sheet 1 of 3 75528N 10-3-13 Rev. H

Qty. (6) Hex Bolt M12X1.75X45 CL10.9

Qty. (2) 1/2”-13 Handle Nut

Qty. (6) Conical Washer

Qty. (2) Hex Bolt 1/2”-13 X 1-3/4” Gr.5

Qty. (2) Spacer

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75528F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

7500 (3405 Kg) 750 (341Kg)

Weight Carrying

Ball Mount

5000 (2270 Kg) 750 (341 Kg)

Wiring Access Location: SUV 1 , SUV2

Form: F205 Rev A 5-6-05

Frame

rail

Bumper

Fascia

Spacer

Lower exhaust system for ease of installation.

Fasteners Typical Both Sides of Vehicle

Bumper

Existing

weldnuts

Exhaust not shown.

Sandwich spacer between

receiver and bumper.

Use this combination for

bumpers with weldnuts.

Use this

combination for

bumpers without

weldnuts.

If needed install handle nut through rectangular

access hole next to round hole. Typical.

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions GMC Acadia Saturn Outlook Buick Enclave

Page 2 - Instructions d’installation

Instructions d’installation Numéros de pièces : 75528 87435 44569 78218 UH Attelage montré dans la position appropriée Équipement requis : Clé : 18 m

Page 3 - Números de partes:

Instrucciones de instalación Números de partes: 75528 87435 44569 78218 UH El enganche se muestra en la posición correcta Equipo necesario: Llaves:

Comments to this Manuals

No comments

Reese 44569 PROFESSIONAL RECEIVER User Manual

Browse online or download User Manual for For the car Reese 44569 PROFESSIONAL RECEIVER. Reese 44569 PROFESSIONAL RECEIVER User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Reese 44569 PROFESSIONAL RECEIVER